PARADOX IMPERIAL -  OTOMASYON SISTEMLERİ

DIM1D 1 Channel Dimmer Module    Features   One high-voltage channel for: - Phase control dimming - Mark X fluorescent dimming - 0 to 10V fluorescent dimming   Output rating: 1000W@230V / 520W@120V   Maximum load: 4.4A   Connects to Multibus: 4-wire encrypted 13.8Vdc communication bus at 500bps   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   All programming is done using BabyWare PC Software   DIN rail enclosure with removable terminals for fast, secure, orderly and economic installations   Supports 35mm DIN Rail mounting   On-board buttons to manually control dim level   Dim intensity LED display   3-LED module status display   Includes labels to identify output

HV8D 8 Channel Motor Control Module    Features   8 high-voltage relay outputs (110/240V, 10A resistive load)   Motors up to 1/2hp (max 8A)   2 operating modes: relay mode and shutter mode Relay Mode: - 8 high-voltage devices Shutter Mode: - Outputs paired for up/down control of 4 shutters - Built-in calibration mode for open/close timing - Emergency stop - Global up/down for all connected shutters   Connects to Multibus: 4-wire encrypted 13.8Vdc communication bus at 500bps   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   All programming is done using BabyWare PC Software   DIN rail enclosure with removable terminals for fast, secure, orderly and economic installations   Supports 35mm DIN Rail mounting   8 on-board buttons to manually control each output (illuminates to show status)   3-LED module status display   Includes labels to identify outputs

LV8D 8 Output Low-Voltage Relay Module    Features   8 solid-state relay outputs (0-24V AC/DC, 250mA each)   Connects to Multibus: 4-wire encrypted 13.8Vdc communication bus at 500bps   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   All programming is done using BabyWare PC Software   DIN rail enclosure with removable terminals for fast, secure, orderly and economic installations   Supports 35mm DIN Rail mounting   8 on-board buttons to manually control each output (illuminates to show status)   3-LED module status display   Includes labels to identify outputs

HUB4D Hub and Bus Isolator Module    Features   Divides the bus into four completely isolated outputs (if one output fails, the others will continue to function)   One input port, 4 completely isolated output ports   Each output port provides communications up to 900m (3000ft)   Opto-isolated ports provide protection from high-voltage spikes (ideal for exterior lines)   In-field firmware upgradeable via bus at high speed (RS-485)   DIN rail enclosure with removable terminals   Supports 35mm DIN Rail mounting   On-board buttons to manually activate or deactivate each hub output   4-LED status display per hub output   3-LED module status display   Includes labels to identify each output

PS27D 4-Output 2.85A Power Supply Module    Features   2.85A switching power supply   Transformer sharing: modules can share a central AC supply (16 to 24Vac) throughout the system   4 auxiliary outputs providing at up to 500mA each   Auxiliary outputs can be used in parallel to increase output current   LCD to display 3-digit voltage and 3-digit amperage of each output, sum of paralleled outputs or sum of all outputs   Auxiliary outputs can be used as PGMs   In-field firmware upgradeable   DIN rail enclosure with removable terminals   4 on-board buttons to manually activate or deactivate each auxiliary output (button illuminates to indicate status)   5-LED module status display   Fully supervised (AC, battery, low battery and auxiliary limit)   Selectable battery charge current (350mA/850mA)   Includes labels to identify each output

MSA4H/V 4 Button Wall Switch    Features   4 buttons to control any output (lights, sprinklers, etc.) or macros (group of outputs)   Set buttons in Toggle mode (1 button on/off) or Switch Mode (1 button on / 1 button off)   Activation status LED per button   Backlit button identification   Connects to Multibus: 4-wire encrypted 13.8Vdc communication bus at 500bps   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   All programming is done using BabyWare PC Software   3-LED module status display   Includes labels to identify each button

MSA8H/V 8 Button Wall Switch    Features   8 buttons to control any output (lights, sprinklers, etc.) or macros (group of outputs)   Set buttons in Toggle mode (1 button on/off) or Switch Mode (1 button on / 1 button off)   Activation status LED per button   Backlit button identification   Connects to Multibus: 4-wire encrypted 13.8Vdc communication bus at 500bps   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   All programming is done using BabyWare PC Software   3-LED module status display   Includes labels to identify each button

MVCA2 2 Dial Dimmer Wall Switch    Features   2 rotary dials with push on/off action to dim outputs, such as lights or shutters or macros (group of outputs)   8 LEDs per dial to display light intensity or shutter position   Global button per dial to control an alternate device or macro   Backlight button to adjust LED light intensity   Connects to Multibus: 4-wire encrypted 13.8Vdc communication bus at 500bps   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   All programming is done using BabyWare PC Software   3-LED module status display

MCB1H/V 1 Dial / 4 Button Combo Wall Switch    Features   Combines 4 buttons and 1 rotary dial to control/dim any output (lights, sprinklers, etc.) or macro (group of outputs)   Set buttons in Toggle Mode (1 button on/off) or Switch Mode (1 button on / 1 button off)   Rotary dial features push button on/off control   Activation status LED per button with backlit button identification   8-LED display for dial’s light intensity or shutter position   Global button to control an alternate device or macro with rotary dial   Backlight button to adjust LED light intensity   Connects to Multibus: 4-wire encrypted 13.8Vdc communication bus at 500bps   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   All programming is done using BabyWare PC Software   3-LED module status display   Includes labels to identify each button

BabyWare Imperial PC Software

K07C 32-Partition Grafica Color LCD Keypad   Features   Upload photos or imlkages using the SD slot   Supports any two colors (16-bit) for background and text   Supports full colour for sreensaver display via integrated SD memory card   Compatible with Imperial (Q2) and Digiplex EVO   Firmware upgradeable via Multibus using RS-485 at 57.6Kbps   Display the status of 32 partitions and 384 zones   Zone alarm display: the zones in alarm are shown until the system is disarmed   1 built-in indoor temperature sensor   1 zone/temperature input. Connect a detection device or TEMP07   Simple text-driven menus with step-by-step guidance   Alarm clock and special reminders   Up to 15 tunes for use with door chiming, entry delay, exit delay and more   Independently set chime zones   3 keypad-activated panic alarms   Supports up to 8 built-in user-selectable languages in three language sets   Adjustable backlight, contrast and volume   Available in two designer colors (silver or champagne)   Dimensions (with door closed): 11.5cm x 17cm x 3cm (4.5in x 6.8in x 1.3in)   6.5cm x 6.5cm (2.6in x 2.6in) graphic LCD with a resolution of 128 x 128 pixels

                        US Elk.Elektron.İltş.San.Tic.Ltd.Şti.   2010

                     www.usguvenlik.us   l   www.usguvenlik.com